Tips On How To Fix A Leaky Faucet

Tips on How to Fix A Leaky Faucet

When you hear your faucet continuously dripping, there is a problem. Problems occur when the issues are left untreated. Most homeowners tend to be frustrated when they see an increase in their water bill. Here are some do it yourself tips on how to fix your leaky faucet.

Most Common Causes of Leaky Faucets

A leaky faucet is one of the causes of water damage, especially in your kitchen. The average leaks in every household are nearly 10,000 gallons of water wasted every year, and 10 % of homes have leaks that waste 90 gallons or more per day.

  1. O-rings problems. One of the most common issues of a dripping faucet is the O-rings. An O-ring is a small rubber ring located around the valve system. If water is leaking around the base of your faucet, it is caused by worn-out O-rings. The O-rings can become loose or wear out over regular use. 
  2. Build up mineral deposits. It usually happens when your water is hard, and it forms calcium in the faucet. If water is high in calcium and other minerals, it’s called hard water, and notice a lot of white growth or scale around your faucet. If your water contains a lot of iron, the build-up may take on a rusty or yellow hue and could stain your sink.
  3. A corroded Valve Seat. A valve seat is a connection between the faucet and the spout. A sediment build-up can corrode the valve seat, causing it to leak. 
  4. Improper installation. If the washer is not on the right size or not installed properly, it will cause water leaks.
  5. Broken plumbing. A damaged pipe develops cracks that can interfere with water pressure causing the faucet to leak.

 

Do-It-Yourself Tips on How to Fix a Leaky Faucet

A dripping faucet can be a minor problem. But if it is left unrepaired, it can cause a big issue. Here are some helpful tips you can on fixing a leaky faucet. 

First, shut off the water supply before repairing it. Make sure to turn off the water valves from your faucet located underneath the sink. Once you shut off the valves, make sure to drain the remaining water in the pipes.

Second, make sure to close the drain. Use a sink plug if you have one, or you can use a rag to plug it to avoid screws going down the drain.

Third, determine what type of faucet you have and remove all the body parts to identify the problems. Make sure to set them apart in the order you disassembled them and take a photo of it for much easier reassembly. Check The Spruce to help you identify the different types of faucets and how to fix them.

Fourth, check the picture you took earlier and assemble all the parts in proper order. Make sure not to force the pieces to avoid deterioration.

Fifth, You have to test the water flow once you’ve finished the repair. Make sure to turn the water on slowly to avoid too much pressure and cause more damage.

 

Dealing With Water Damage From A Leaky Faucet? Contact Professionals

When your leaky faucet has caused damage to your property, call professionals at Water Damage Costa Mesa immediately. Untreated water damage can lead to a more significant issue such as structural damage or mold growth. We, at Water Damage Costa Mesa, provide quality cleanup and restoration services. We also provide 24/7 emergency services for all types of water damage. Call our local office now. 

 

Leave a Reply

Your email address will not be published. Required fields are marked *