Causes and Solutions for Water Damage From Air Conditioners

Water Damage From Air Conditioners – Causes And Solutions

As the summer season comes, an air conditioner is one of the most essential appliances in a home. It helps keep homes and occupants cool and collected. However, as long as air conditioners are in good working condition, little problems that are often ignored lead to a big problem like water damage. 

Water leak from an air conditioner is one of the most common causes of water damage in homes. A small leak if left unattended can quickly lead to water damage to your ceiling, walls, and flooring. Moreover, water damage is not a joke. You may need to spend thousands of dollars for repair. 

Understanding the causes of water damage from your air conditioner and knowing the ways to solve the problem can keep you from spending a lot of money for restoration services. 

 

What Causes My Air Conditioner To Leak

There are several reasons that can cause your air conditioner to leak and if it happens the damage is imminent and you have to act fast. 

 

Condensate Drain Line Is Clogged

The condensate drain line in your AC unit works to remove the water released when the process of evaporating liquid to gas occurs. Over time, the drain line accumulates dust, dirt, mold, and sludge causing blockage and leading to water back up. 

Fortunately, this is an inexpensive air conditioning problem as you just simply need to clean the pipes that drain the water. You can flush it with water or use a vacuum to remove the debris.  

 

Drain Pan Is Damaged

Your AC’s drain pan is located underneath the indoor air handler. This is used to catch condensation from your AC unit. Over time, the drain pan gets old and rusty causing water to fall directly inside your home. In this case, you have to replace your drain pan.

 

Dirty Air Filters

When the air filter of your air conditioner is dirty, the airflow becomes restricted causing the evaporator coil to freeze up. When the ice melts, it can lead the excess water to drip out of the pan as the pan may not be able to handle the amount of water. 

Check your air filter regularly to see if it is dirty, then clean, or replace it if necessary. Replace your air filter one to three months and more often in the summer when you have to use your air conditioning system for longer periods of time. 

 

Lack Of Refrigerant

Similar to a dirty unit filter, low refrigerant can cause to lower the pressure in your air conditioner system, which can result in freezing the evaporator coil. When the coil melts, it can cause the drain pan to overflow and leak the excess water. You will notice that your AC is low on refrigerant if it is not cooling well or you can hear some hissing sound. 

Depending on the amount of the leak, you may need to repair it or replace your entire AC unit. 

 

How To Deal With Water Damage From Air Conditioners

 

If you notice leak from your air conditioner, the first thing you can do is turn off your unit. And if you are familiar with the parts of your unit, go around it and check for obvious problems. If you are handy, you might be able to repair small problems like clogged condensation lines or damaged or broken drain pan. On the other hand, contact a professional AC repair technician to address the issues and take these water damage cleanup tips. 

  1. Remove standing water and examine the severity of the damage. If you plan to fix the damage on your own, make sure that it is a job you can handle.
  2. Dry out the entire area including wet furniture and carpet. You can use a wet vac you help reduce the drying time. Set up fans throughout the affected area to allow air circulation. 
  3. Repair or repaint any damaged drywall or baseboards and inspect affected surfaces for mold and mildew growth.

 

Does My Insurance Cover Water Damage From Air Conditioners Leak

A standard homeowner’s insurance policy may or may not cover water damage from your AC. If the damage happened accidentally and that you were able to perform proper maintenance of your AC unit, then your insurance policy will most likely cover the cost of the damage. But, if mold damage is included, unfortunately, your insurance company will not cover it. Mold damage is usually a result of the negligence of the homeowner. You have to work closely with your insurance agent to know what is cover and not. 

 

Contact Superior Restoration For AC water damage

If water damage from your air conditioner seems too much to handle, Superior Restoration is here to help. We are always ready to provide quality clean up and restoration services.

We have skilled technicians who can take care of everything, from cleaning up to restoration and from mold removal to remediation. Our technicians use advanced technology that ensures your home is back to its pre-loss condition. Contact our local office, Water Damage Costa Mesa, today. 

After a storm

5 Important Steps To Take After A Storm

Severe storms with powerful winds can be dangerous and frightening. Often, this natural disaster can leave severe destruction to your property which results in expensive storm damage repair. In some cases, when the damage is severe, your home is left unprotected and susceptible to further damage. Holes and gaps can allow outside elements or intruders to enter your home and cause more problems. So, if your home or business suffers damage due to storm or heavy rainfall, you need to act fast and address the issue immediately. Seek professional help right away for cleanup and property restoration. But before professionals can get to your property, you may take some steps to mitigate the damage.

You may continue reading to learn what to do and NOT to do when after your property suffers from storm damage.

 

 

1. Keep Safe

 

As a homeowner, it’s understandable that you would want to immediately fix things and get your home back to its normal condition. However, it is very important to put your and your family’s safety first. Thus, before inspecting your home make sure that you remain safe.

When inspecting your storm-damaged property, look out for hazards like exposed nails and broken glass. Do not step on standing water until you have completely eliminated the power supply line that connects to the affected area. Avoid using electrical appliances and let it serviced by a professional.

If you suspect a gas leak, turn off the main gas line. Open the windows and go outside immediately. Notify the authorities of the situation and refrain from going back to your property until the authorities have deemed your property to be safe.

 

 

2. Assess The Damage

 

Once the authorities have deemed that your home is safe to enter, inspect your place to know how much damage the weather has incurred. 

Start inspecting your roof. Your roof is the most vulnerable to extensive damage. A fallen tree limb and debris might have caused structural damage to your property. Some signs of a damaged roof are holes in the roof, missing or dented asphalt shingles, split seams, leaks in your roof, and others.

Then, check windows and doors which are more susceptible to strong winds and flying debris. Check windows for cracks, holes, damaged panes, and frames. Board up broken windows until professionals arrive.

When inside your property, check for damaged materials, water damage in walls or ceilings, and other structural damage.

 

 

3. Contact Your Insurance Provider

 

You should contact your insurance provider immediately to inform them of your property damage. Take photos or videos of the damage as they are necessary evidence that your insurance provider will look when you are filing a claim. You may also make a list of your damaged belongings together with its value. Your insurance provider should tell you what steps to take in making an insurance claim. Call them as often as you can.

 

 

4. Avoid Additional Damage

 

While waiting for the professionals to arrive, take some steps to avoid further damage.

Start with your roof. Clean out branches, leaves, and other debris and begin to tarp your roof. Cover holes and gaps that can serve as entryways for rainwater. If you have damaged windows and holes around your home, you may use a wooden board to cover them.

If flooding occurs in your home, remove the water immediately. Untreated water damage can cause more serious damage like structural damage and mold growth. Use a sump pump to generate the water to the drainage or you can also use a shop vac to soak up the remaining water. Move items that have been affected by water to a safe place and dry them as soon as possible.

 

5. Choose The Right Restoration Company

 

If your property, home, or business, has been damaged in a storm, it is critical to address the problem immediately. Quick actions can prevent the damage from getting worst. However, storms and other natural disasters can bring out people who will take advantage of your current situation. Poor or unfinished restoration can leave you with an unhealthy home. When there is water damage involved, mold will begin to grow within 24 to 48 hours. Thus, it is important to choose a trustworthy and certified restoration company that will go all the way, from removing water to drying it up and from repairing to restoring your home.

We, at Superior Restoration, understand how dreadful storm damage can be on your property. Thus, we are committed to providing you with quality and excellent restoration services. Our technicians are certified, skilled, and equipped with state-of-the-art equipment to fully eliminate excess water and thoroughly dry your property. At the same, they will repair and restore your home to its normal condition. To know more about our storm damage and water damage restoration services, you may contact our local office today, Water Damage Costa Mesa.

Why Need A Professional Fire Damage Restoration

Why Need A Professional Fire Damage Restoration

Just like any other disaster, fires can happen in your home and sometimes they appear without warning. When it does, it can cause great devastation in your life. As a homeowner, you get overwhelmed by the situation and want to get back on your life as soon as possible. You may want to take fire restoration of your home on your own to bring back its outlook and integrity. But, fire damage doesn’t end after putting out the fire. You need to have a professional fire damage restoration to help you in restoring your home. 

 A home that has been damaged by fire can hose hazardous chemicals and residues that can further damage your property and can put your life at risk. Proper removal and cleaning of these residues are necessary for the restoration process to properly restore your home. Also, this process involves foreseeing future danger like mold and mildew growth and ensuring complete removal of the water used in extinguishing a fire. Thus, as a certified restoration company, we recommend that you take professional fire restoration service.

This article will highlight the key points why you need a professional restoration company in restoring your home to its prime condition after a fire.

 

Why Fire Damage Restoration Is Not A DIY

 

 

1. Exposure to Hidden Health Hazards

 

Most property owners take up the task of cleaning up a home or business after a fire, not knowing the consequences or dangers of dealing with the task. Smoke and soot which are the aftermath of a fire can pose health risks to those who are exposed to them.

Soot, after a fire, is formed due to the household materials like plastic, textile, wood, and foam that was not completely burned. Soot particles then contain toxic materials or when become airborne may contain cancer-causing fibers, tar, ammonia, formaldehyde, and others. Walking through your fire-damaged home can put yourself at risk of developing skin and eye irritation. When this chemically-laden soot enters your lungs, you may experience breathing problems, asthma, and other respiratory illnesses. Longer exposure to soot particles may lead to more serious illnesses like bronchitis, heart attack, or cancer.

Cleaning up a fire-damaged home will need you to get exposed to this toxic material. A normal cleanup procedure will not guarantee proper removal of smoke and soot residues and can linger to your home through the years. That is why you should leave the cleanup process to a restoration professional to protect yourself from hazards and to truly restore your home to its pre-damaged condition.

 

 

2. Improper Tools and Methods

 

Soot, smoke, and odor will most likely linger and further damage your home. You might turn to bleach and a scrubber to bring your home back to its normal phase. But these household cleaning materials may not be enough to completely clean up and remove fire and smoke. Wiping away soot particles on surfaces is not enough. It requires deep cleaning to eliminate lingering health hazards and thoroughly remove odor.

Professionals have proper tools and methods to thoroughly and safely perform fire restoration.

 

 

3. The Process Could Take Longer

 

Fire damage restoration is not a straightforward task, as many people may assume. It is way different from a household job you do every weekend. The restoration process includes salvaging and cleaning belongings and repairing the damaged structure. Processing insurance claims can be overwhelming and stressful. The time you spend on the cleanup process without the help of a professional can be very challenging. Furthermore, saving money for DIY restoration may just put to waste if improper restoration is done. Hiring a fire restoration contractor who is an expert in every aspect of the restoration process is a better option.

 

What You Can Expect From A Professional Fire Damage Restoration

Fire damage restoration professionals perform several tasks to ensure that a fire-damaged home is back to its safe, sound, and normal or maybe better condition. Below are the things you can expect from the professionals during the cleanup and restoration process;

  • Using professionally grade vacuums to thoroughly remove even the last traces of chemicals, soot, smoke, and ash.
  • Using odor removers to properly contain smoke, harmful chemicals, and burnt substances like plastic, wood, and foam, odor.
  • Complete removal of water used to extinguish the fire to prevent mold growth and further damage to your home’s structure.
  • Identifying and safely removing salvageable items.
  • Repairing, replacing or restoring the structure of your property, like drywall, ceiling, subflooring, window panels, and studs.

All these things emphasize the importance of having fire damage professionals on your side when a fire damaged your home. Always consider the hazards and challenges of cleaning up your home after a fire. Let professional fire damage companies, like Water Damage Costa Mesa, handle your worries, from clean up to processing your insurance claim to restoring your home.

Our team is here to deliver the best service in the entire area of Costa Mesa. We also provide other restoration services like water damage restoration and mold removal. Contact us today to learn more about our restoration services. 

water extraction and water mitigation

The Difference Between Water Extraction and Water Mitigation

Your home can be prone to any disasters. Pipes may leak and eventually burst, causing indoor flooding. Rainwater could intrude your home through your basement and lead to some inches of standing water. A washing machine may leak and spill soapy water into your hardwood floors. All these instances can happen and damage your property.

In any kind of water damage, there should be no time wasted. Standing water can spread through porous building materials. The longer the water sits in your property, the more damage can arise. If not treated quickly can compromise the structural integrity of your home and might even lead to permanent property loss. Furthermore, the water damage that is left untreated for a long time can lead to health hazards. To prevent all these things from happening, it is necessary to take quick actions to mitigate and restore your home.

Water damage restoration is composed of different steps, like water extraction, mitigation, mold removal, and others. But the first things to take are removing standing or excess water from your property and preventing further damage.

In this article, we will give you a deeper understanding of the two most crucial steps in water damage restoration procedure; water extraction and water mitigation.

 

What Is The Difference Between Water Extraction and Water Mitigation

Water extraction is the first step in the restoration process. This involves removing all excess water and moisture from your property. Water extraction helps in minimizing the damage after the water event. Furthermore, this process helps to speed up the drying process and prevent potential risk for mold growth and secondary damage.

Water mitigation, on the other hand, is the process of cleaning, sanitizing, deodorizing, and drying of a water-damaged property to reduce the severity of the damage due to water leaks, sewage backup, flooding, and others. In this process, technicians take quick actions and necessary steps. Removal of unsalvageable items, cleaning, applying disinfectants, and drying affected areas are some of the examples.  

 

The Steps Involve In Water Extraction Services

Standing water and excess moisture in your property does not only cause structural damage. According to the Centers for Disease Control and Prevention (CDC), mold grows as quickly as 48 hours after a home has been submerged in water. Mold can pose serious health issues especially to those who have respiratory problems. That is why water extraction is a crucial step in the restoration process.

Technicians use powerful equipment like wet/dry vacuum and submersible pumps to remove standing water. They also use professional equipment in the extraction process like moisture detectors and hygrometers to determine the severity of the saturated moisture. They also use infrared cameras to find the hidden water behind walls and to fully remove excess moisture. 

Furthermore, water removal includes removing water from wet surfaces where standing water is not visible. This is to completely remove water that seeps through the cracks and grooves of the affected surface.

 

The Steps Involve In Water Mitigation Services

When the restoration company has completely provided extensive water extraction procedure, technicians will take additional steps needed to prevent further damage. Depending on the severity of the damage, the mitigation process involves;

  • Removing unsalvageable items
  • Removing damaged materials like flooring and drywall and upholstered furniture.
  • Cleaning and disinfecting affected areas and salvageable items.
  • Deodorizing the property
  • Drying the structural component of the home using appropriate tools and equipment.
  • Testing moisture and conducting humidity levels to ensure that all problems have been addressed and resolved.

 

The Importance of Water Extraction and Water Mitigation

Water damage can be very destructive to your property, and when it happens, addressing the issue immediately is crucial. Don’t wait long enough for water to set in your property and cause greater damage. Even a small amount of water from a leaky pipe can later be destructive and put your home at risk of mold growth and eventually threaten its structural integrity.

Excess water and moisture should be completely eliminated from all the affected areas. Proper drying is also as important as doing extensive water extraction. Inefficient drying can also compromise the structural integrity of your home.

Efficient water extraction and water mitigation can lead to greater chances of having a successful restoration of your home.

 

Call Water Damage Costa Mesa For Professional Water Extraction and Mitigation Services

In the event of a water damage accident, whether it is a cause of a leaky pipe or a sewage backup, be sure to immediately contact the most trusted water damage restoration company in Costa Mesa. Providing both water extraction and water mitigation services and even complete restoration, Water Damage Costa Mesa is equipped and skilled in returning your home to its pre-damaged condition. We will make sure to restore your home with speed and efficient manner so you get back your life on track as soon as possible.

water leak behind wall

The Signs Of A Water Leak Behind The Wall

Water damage can happen anytime and anywhere in a home because of its many sources. It can happen due to pipe bursts, sewage backup, or floods. For all, water damage is always troublesome and challenging to handle. But, what is even scarier is to deal with is the damage that is not detected immediately, and by the time you noticed it, you will be faced with thousands of dollars of restoration. Just like water damage due to faulty plumbing, many homeowners think that this damage includes leaking faucet or any pipes that are easily seen. However, there are cases that plumbing gets damaged inside walls and is impossible to detect until it has already caused severe damage.

 

The Danger of A Hidden Water Leak

A hidden water leak, when left undetected, can cause serious structural damage to your property. The excess water and moisture can seep through the wood, drywall, insulation, and wallpaper, causing them to warp, stained, bubble and deteriorated. If the damage is severe, it may require a long and expensive restoration process.

Moreover, a continuous water leak can make a damp environment that can become a perfect place for mold to thrive. If mold is not treated quickly, it can cause considerable damage and health issues like infections and allergies to those who are exposed to it.

Regardless of the source of the damage, could it be damage from burst pipes or water leaks, acting fast and treating the damage immediately is crucial.

 

6 Signs Of A Water Leak Behind The Wall

Some sources of water damage can be seen easily. However, a water leak behind walls cannot catch your attention right away. That is why knowing how to detect water leaks behind walls can help to minimize the damage. You should have a lookout of these signs of a water leak on your sheetrock.

1. Musty Smell

As slow water leak gets absorbed into building materials like wood, drywall, or sheetrock, they become damped and eventually create musty odors. Moreover, walls that have been affected by a water leak can be vulnerable to mold growth and can generate musty odors. If you notice any musty smell near your wall, you are most likely dealing with water damage behind walls or mold growth.

2. Mold On Walls or Baseboards

It is relatively common for mold to grow in areas that are almost always wet like bathroom, kitchen, or laundry rooms. But if you notice molds appearing on your walls, baseboards, and even ceilings, it is definite that you have faulty plumbing inside your walls.

3. Stains On The Wall

When water starts to leak within the walls, not long enough, it will seep into the drywall and sheetrock and eventually create stains. If the stains on your wall become bigger, this simply tells you of a hidden plumbing leak.

4. Peeling Paint or Wallpaper

Another sign that there is a leaking pipe behind your wall is when paint or wallpaper starts peeling or bubbling. This happens when the sheetrock behind your wall stays wet and the wall is producing moisture.

5. Slowly Warping Walls

Over time, when the sheetrock absorbs too much water from a low leak, it eventually develops bends and curves that can cause the wall to warp. Too much warping can cause structural damage that will result in an expensive repair. If you notice your wall starting to warp, it is a sure sign that you are having water leaks behind your walls.

6. Stained or Bucked Floors or Ceilings

Wet sheetrock doesn’t only affect your walls. When the sheetrock has been wet for a longer time or has absorbed too much water, it can affect adjacent floors and ceilings. Inspect walls and ceiling for any signs of stains and buckling.

 

How To Test For Hidden Water Leaks

Figuring out hidden water leaks takes a lot of testing. At times, even the signs above are visible, they do not accurately tell you of a hidden leak. If you want to have more evidence of a hidden water leak, you can use your home’s water meter and follow these steps.

  • Turn off all faucets and appliances that use water in your home.
  • Look at your water meter and take note of the usage number.
  •  Leave water faucets off inside and outside of your home for at least 3 hours.
  • Check the usage number on the water meter again to see any changes.
  • If there is an increase with the usage number, it means you have a water leak somewhere in your home.

 

How Professional Restoration Company Help You

A water leak behind walls is a problem that requires immediate attention. That is why it is always best to contact a professional restoration company. DIY-ing can be a little less cheap, but it does not assure you of full restoration and prevention of further damage. A professional restoration company can help you in many ways.

  • The company will be in charge of the entire job.
  • They use state-of-the-art repair, cleaning, and restoration techniques using advanced equipment.
  • The staff will take care of mold removal and remediation.
  • They will handle insurance paperwork filing and claims.

If you notice any signs of a water leak behind your wall, call us right away. Our local office, Water Damage Costa Mesa, is ready to respond with any sort of water damage restoration emergencies.

Why Does My Fireplace Smoke In My House?

One of the best things to do on a chilly night in winter is relaxing in front of a fire. But, what if instead of a warm and cozy night, you got a smoky fireplace experience? That can ruin the entire moment. 

When smoke doesn’t flow up to the chimney and come out of the firebox, you’ve got a serious problem and some safety issues. Fireplace smoke can spread throughout your home and can cause odors that are hard to remove to your furniture, carpet and other fabric materials.

 

Why Is My Fireplace Smoking

There are several reasons why your fireplace sends smoke inside your home, instead of it going out of the chimney. But, two factors can trigger this issue. If any of this part is not working, problems will surely arise.

  • Fireplace Flue Or Chimney

A fireplace chimney is the structure visible outside of your home and is built with stone, bricks or blocks. Your fireplace has a flue that helps an updraft to carry the hot gasses and smoke up and out of the house. If the flue is cracked, partly or completely blocked, either at the base or cap of the chimney, it will not function properly. A blocked flue may be an indication of a broken fireplace damper.

  • Fireplace Damper

A fireplace damper is an important part of the chimney that serves its purpose both actively and inactively. When the fireplace is in use, the damper opens to allow smoke and gas from fire to vent outside of the house. On the other hand, the damper closes when not in use to prevent pests, debris, and other harmful elements to get inside the firebox.

 

Other Causes Of Fireplace Smoke Inside The House

  • Chimney Blockage

Over time, a chimney becomes blocked because of creosote build-up. At times, at the beginning of the fireplace season, or when the fireplace is often used, the blockage is usually a bird’s nest or animal debris. In this case, you may need professionals to effectively and safely remove the blockage.

  • Well-Insulated House

A well-insulated house is great in providing comfort and lowering energy consumption. But, if a home is relatively airtight, it cannot supply enough outside air to the fire and can lead to the negative pressure inside the house.

  • Exhaust Fans Inside The House

An exhaust fan that runs from your kitchen or bathroom can be another reason why your fireplace smokes inside your home. Exhaust fans can create a powerful negative pressure that hinders the good drafting of smoke.

  • Too Warm Temperature Outside

If the temperature differential of the inside room and the outdoors is greater, there is better drafting of fire. But, if the temperature outside is warm and close to the indoor temperature, there is a higher possibility that the fireplace will work poorly and the smoke will linger inside your home.

  • Burning Green or Wet Wood

Too green or wet fireplace wood can produce more smoke that is too much for your flue to handle. This can cause smoke to flow into your room.

  • Poorly Built Fireplace

Several factors can identify a poorly or improperly built fireplace. For instance, a chimney that is too short compared to the home, or a damper that is too small for the fireplace. If a fireplace is not properly built, it can cause several problems like fireplace smoke billowing inside your home.

 

How To Avoid Fireplace Smoke Inside Your Home

Nothing beats the joy of having a warm, cozy, smoke-free night in front of a crackling fire.

  1. Use seasoned wood, wood that has been cut for at least six months
  2. Open the damper before igniting the fire.
  3. Open up a window, allowing outdoor air to circulate a little inside your home.
  4. Check the flue and the damper. You can do this by lighting the newspaper and holding it up the damper for a few seconds.
  5. Hire a professional to clean and inspect your chimney.

 

Dealing With Smoke Damage?

Are you now dealing with smoke damage due to fireplace mishap? If so, you should contact professionals right away.

Wood smoke that lingers inside your home can cause several health issues like respiratory problems and eye irritation. Moreover, once smoke permeates and stays longer inside your home, it can seep into fabrics and fibers. Removing smoke odor in these materials is difficult to do and requires professional cleaning.

At, Superior Restoration, our professionals are well trained and expert in dealing with any kind of smoke damage. We are IICRC-certified, which means we follow the proper guidelines of fire damage remediation and odor removal procedures. We make sure that will bring your home back to its pre-state condition.

If you need help today, please contact our local office, Water Damage Costa Mesa.

Tips To Prepare Your Roof For Winter

Winter is fast approaching and you might be imagining the harsh scenarios this weather can bring to your home. There will be freezing rain and heavy snowfall on lawns and streets and rooftops will be filled with a pile of ice. Winter can be harsh on its way and there’s nothing we can do to stop it. Yet, preparing your home for the worst is the only way we can brace this season. It is also very important to prepare your roof for winter. 

One of the most important aspects of your preparation for winter is making sure that your roof is in good shape before the cool weather strikes. Tackling any roof damage in the midst of winter can be very difficult. Autumn is the best time to prepare your roof for the coming season. Keeping your roof well maintained can protect your home from any potential water damage, mold issues, and other problems.

Here are some tips you can do to prepare your roof for winter.

 

1. Clean Gutters and Downspouts

 

Keep your gutters and downspouts freed from any debris, twigs, pine needles, and fallen leaves.

Gutters and downspouts are both essential in draining melting snow and rainwater. Downspouts are used to guide water out of the roof. If the downspouts or gutters are blocked and cannot properly drain rainwater or thawed snow, this liquid can cause water damage to your roof and it will eventually infiltrate inside your home damaging its interior wall and other surrounding areas.

Removing clogs from gutters requires easy steps but can save you a lot of trouble during winter. You can use a ladder to check your gutters. If you are handy, you may invest in a hose-end attachment that is designed for cleaning gutters. Small debris can be removed with a hose. While large debris that is stuck in the gutter can be removed by a trowel. Watch out for the water that drains from the gutter to the downspouts. If it doesn’t drain completely, it could be the downspouts are blocked. To unblock the downspouts, use a plumber’s snake. Be sure that the downspouts drain out the water properly. Moreover, to prevent debris from falling into your gutter, install a leaf guard.

 

2. Check and Replace Loose Shingles

 

A deteriorated roof can lead to expensive water damage. Check for any loose or missing shingles before winter comes. If you notice the grit along the shingles goes down to the gutters or any tabs are missing, it can be a sign of damage. If the leaves or other debris are stuck underneath the shingle, it requires replacement. Checking the shingles on your roof and giving them regular maintenance can keep your home from the damage harsh elements can bring.

 

3. Check Roof Flashing

 

Aside from shingles, roof flashing is an important component of the roofing system that gives additional protection to the interior of your home. It is designed to guide water to flow to the slope of the roof. You can expect serious water damage if flashing is not functioning properly.

However, flashing can also get loosen and tear due to the freezing rain and high wind. So before winter strikes check the flashing for any signs of damage. If the damage is irreparable, replace it. Replacing the flashing is way cheaper than replacing your entire roof or fixing the damage it has caused.

 

4. Maintain The Surrounding Trees

 

Any trees surrounding your roof can be a threat during this harsh weather. Tree limbs or branches that lean toward your home might crash your home because of heavy rains or snowfalls. Heavy branches that break due to severe weather might create holes in your roof and water might find its way to enter your home. Before the first snowfall hits, make sure to trim any overhanging branches to avoid these nuisances.

 

5. Check or Install Attic Insulation

 

During snowfall, ice, or snow that is trapped on the rooftop can corrupt the shingles and cause the cold breeze to infiltrate inside your home. But with proper attic insulation, a build-up of snow and ice can be reduced or even prevented. Moreover, proper attic insulation can help reduce at least 30% of your energy costs.

 

Aside from tips in preparing your roof for winter, you may consider hiring professionals to thoroughly check your roofing system.

As a homeowner, it is your utmost responsibility to protect your home from any harmful elements like water. One of the things that you can do to prevent any disaster to ruin the interior of your home is keeping your roof to its optimum shape. It can be laborious but it is all worth the trouble. Be prepared for what winter can bring to your home.

Lastly, if your home has experienced water damage due to a leaky roof or any other sources, you can contact water damage Costa Mesa. They will be on-site in the fastest way and restore your home to its pre-state condition.

FAQ's about Mold Removal

Top 5 Most Commonly Asked Questions About Mold Removal

Though mold is considered a natural fungus that plays an important role in outdoor conditions, mold in homes should be removed and avoided. Mold is an airborne threat that can cause damage to your property and can pose hazards to your health conditions.

However, mold removal can be a tricky and complicated process. It might need advanced tools and proper procedures. The old folktale that you think is the best solution, might do more harm than good. That is why mold remediation professional is necessary. These professionals are trained and experienced in dealing with any type of mold issues. They make sure that any sort of problems associated with mold growth will be dealt with accordingly.

But before taking any steps into mold removal, here are some questions that can guide you.

1. What causes mold growth?

Mold can grow in different ways and through several factors. Because there are up to 300,000 types of mold in the world, it is difficult to identify what causes each one of them grows. 

However, when an area is damp and not properly ventilated, mold will definitely grow. Mold also grows where they can absorb nutrients such as in wood, cardboard, and others.  

2. What does mold look like?

Mold appears in different textures, colors, and sizes. They can be in blue, green, or black. At times, they will be confused with mildew or dust. Their appearance varies depending on the nutrient source and their age. Black mold is considered the most dangerous type of mold as it can pose danger to the health of living beings.

Mold is sometimes visible to our naked eyes especially if it has made its own colonization, however, at times, they are hard to recognize. And because they appear in different forms, getting an expert to visit your home and identify the type of mold you are dealing with is recommended. Testing it first can help in deciding the process to take in removing mold. Once the type of mold is identified, the mold remediation process can begin.

3. How to detect mold?

While in some cases mold cannot be seen by our naked eyes, an odd musty smell is the easiest and the most common way of detecting mold in your home. However, it is important to know that even with the presence of mold, a musty smell may not appear. You can also recognize that there is mold in your home through unexplainable health problems such as allergies, headache, trouble breathing and other respiratory issues.

To know if there is mold in your home, it can be a good idea to inspect it and check the areas most vulnerable to mold growth such as kitchen, bathroom, and others.

4. Can I remove mold myself?

EPA recommends that mold should be removed using the IICRC mold removal procedures. Mold removal can be difficult and at times, tricky. In some cases, removing mold on our own can make it worse, for instance, using bleach (which is the most well-known way of removing mold) in porous materials. Bleach consists of water and when applied to porous materials can contribute to mold growth.

It can be fine to remove mold by yourself when the patches are small and they are on non-porous materials such as glass, tiled tubs, and metal. In some cases, it is best to simply discard the contaminated materials, such as dishes. Moreover, before dealing with mold on your own, make sure that you are wearing protective gears.  

It is best to hire mold removal professionals if your home or business has;

  • Mold than is more than a few feet in diameter
  • The mold that occurred after water damage or flooding
  • Mold inside ventilation and heating system
  • Mold inside walls.  

5. What to expect from a mold remediation company?

IICRC provides a guideline in conducting the mold remediation process. There are five steps to follow.

  • Identifying the degree of contamination. This step is done to help in developing a remediation plan. Once it is presented to the owner, a mold removal specialist will begin the remediation process.
  • Setting up and verifying containment. This is as important as the first step as it is about containing mold and making sure that it is spreading to unaffected areas of the home.
  • Removing unsalvageable items. Porous materials are normally unsalvageable even after applying disinfectants. Removing them is necessary to prevent mold from spreading again.
  • Cleaning and disinfecting. This stage of the process performs the actual mold remediation. The tools that can be used are HEPA vacuum and HEPA filter sander. The last step could be wiping the surfaces of the affected area with some effective cleaning solutions.
  • Verifying remediation. This is to make sure that the remediation is successful and the home is completely free from any mold. Air sampling is also needed to verify that the area is back to its normal pre-state condition.

  If you have any further questions related to mold removal and even water damage restoration, you may contact our local office in Costa Mesa.

water damage under your kitchen sink

Understanding Water Damage Under Your Kitchen Sink

Water damage under your kitchen sink is a common issue. Almost all homeowners have a good chance of experiencing this type of water damage. With a lack of maintenance, broken pipelines, and clogged drains, water damage can happen under your kitchen sink.

The Effects of Water Damage under Your Kitchen Sink

In most cases, water damage under your kitchen sink can go unnoticed for a long period because it happens due to a slow leak. But slow leak can become a major problem if not treated immediately. Below are the effects of water damage under your kitchen sink.

  • Discoloration and spotting on the base of the cabinet – water can travel through your kitchen cabinet and into the sub-flooring below the cabinet. Water, when sits there for a longer time, can cause discoloration and spotting.
  • Warping and cupping to the wood floors around your cabinet – If a larger amount of water has pooled down under your kitchen sink, it can cause your wood floors to warp and cup. Depending on the damage, you may need to replace your wood floor or sand it down and re-stained.
  • Mold Growth – As you all know, mold growth is the usual aftermath of water damage. A damp and humid area is a perfect place for mold to grow. 

How To Dry Water Damage Under Kitchen Sink

Though water damage is a common problem a homeowner can face, fixing it will just take you some simple steps. Minor damage, with the right tools, can be repaired on a weekend afternoon.

Clear Out the Area

Remove all items located under your kitchen sink and those that are near the affected area, before you start drying out the area. Wipe them with a towel if they are damped.

Dry Visible Water Spots

After removing all items under your kitchen sink, take a dry cloth and soak up any visible water under your sink.

 Once you have soaked up all visible water, you can use a hairdryer to remove more water. Set your hairdryer to its lowest setting and hold it about 9-inches above the affected area. Keep it steady for 3 minutes, then move to the next spot. Follow the same steps for the remaining spots. If the damage is severe, move your hairdryer back and forth to completely dry out the entire area.

Remove Dry Mold

Mold is the immediate consequence of any type of water damage. Since mold can pose hazards to you and your family, getting rid of it is necessary. Removing dry mold can be done with some scrubbing and bleach. Dampen the sponge with some bleach and water, then scrub it to the area where you can see mold. Bleach doesn’t only help in removing dry mold, it is also good for disinfecting water damaged area.

However, remember that mold can pose harm to those who get exposed to it. It is best to wear a mask and a pair of gloves when removing dry mold.

Apply Cleaner To Water Stains

To make sure that the affected area is thoroughly clean, apply some solutions. Fortunately, there are a lot of solutions you can use to clean areas affected by water damage. The most common one is ammonia. Apply ammonia to a cloth and rub it to the entire area.

You can also use some home remedies such as a mixture of baking soda and toothpaste, and another mixture of cigarette ashes and mayonnaise. The same goes for these pastes, apply them to the affected area. Let the paste sit for about 20 minutes in the affected area.

But if stains are still visible, you might need some mineral oil and steel wool. Scrub the affected area a little harder with mineral oil and steel wool.

Dry Water Damaged Area

Take off the cleaner, and dry the affected area. You won’t need water in removing the cleaner. Simply take another dry cloth and wipe it in a circular motion to remove the paste or the cleaner. Doing this should also lift the water stains.

Rinse and Polish Your Water Damaged Cabinet

Use cool and clean water to wash and remove residues from your now fixed cabinet. After washing it, let it dry completely. Open the cabinet doors or use fans to dry it. When it is thoroughly dry, apply a good polish to make it look new again.

If a water leak has caused extensive damage, it is best done by a certified water damage restoration company.

Why Is A Slow Leak Not Covered By My Insurance Company

Any type of water damage caused by a slow leak is not covered by standard homeowner’s insurance policy. In most cases, we wouldn’t think that we need our insurance company until we find such water damage. However, if you review your insurance policy, you will find a clause that says a gradual leak is not covered by your insurance company. This is because water damage happens due to negligence or lack of maintenance.  

Water damage is always a serious problem any homeowner can deal with, but a regular check and proper maintenance can do well in keeping them from happening. Make sure to perform proper maintenance with the pipes, supply lines, and faucet to prevent water damage under your kitchen sink.

If in any case, you need to deal with water damage, call in water damage professionals. They can work do the work faster and more effectively. Just like our team from our local office in Costa Mesa.

Water damaged floors from a refrigerator leak

Water Damaged Floors From A Refrigerator Leak

However the cause is and the results are, water damage is a no joke. Even a small amount of water can bring severe damage to your home. Just like the damage that a refrigerator leak can have to your flooring.

Water can damage all kinds of floorings. Hardwood floors can have discoloration, bulging, and worse when water seeps into it, they start to pluck out. Laminated floors become warped and swollen. Carpets can have discoloration and when water stays in this material, mold will start to grow in as early as 24-48 hours. Tiles and linoleum can be discolored as well.

Now, you are wondering what causes water damage from a refrigerator and what to do about it.

What Causes a Refrigerator Leak

When you see a leak from your refrigerator, it only indicates that there is a problem that has to be solved immediately. Understanding the causes is like hitting two birds with one stone; solving the damage of your refrigerator and preventing water damage to your floors.

Clogged Defrost Drain

This is one of the most common causes of a leak from your refrigerator. The small drain opening gets clogged due to the food particles and ice in the refrigerator, which prevents water from draining to the pan. When water builds up, the water begins to leak out of the refrigerator and to the floor. Flush the drain with hot water to clear it. If needed, use a stiff wire to remove the blockage.

Damaged Drain Pan

Over time, your drain pan gets cracked or broken, and will eventually lead water to leak.  It is usual for the water to gather in the drain pan, but what is not is when water escapes from the drain pan. When there is water in the drain pan, it evaporates using the condenser fan that blows warm air from the surface of the drain pan. When the defrost drain is clear but you can see water on the floor, better check your drain pan. If the drain pan has cracks or it is damaged, it has to be replaced.

Loose Ice Maker Supply Line

Due to the daily wear and tear, water line connections can get loose. Over time, the seals can become deteriorated. These situations could lead to water leak from your refrigerator and damaging your floors. Go through the length of the supply line that leads to the ice maker and the connections. If you see any signs of moisture, then there is a problem that has to be fixed. If you can see water leaking down the line and dripping to the floor, then there is a problem with your ice maker supply line. The line has to be replaced. Connections should be tightened or replaced if necessary.

Issues with Water Filter

If the water filter and supply line are not connected properly, then a leak from your refrigerator will most likely occur. There are a few reasons why a leak occurs; improper installation, incorrect model or size, and deteriorated housing or seals. If the filter is the problem, you can see water running down outside of the filter and inside the refrigerator. Using the manual, remove and replace the filter. Make sure that the filter is the right model for your refrigerator.

How to Fix Water Damage Floors from a Refrigerator

Repairing water damaged floors from a refrigerator depends on the severity of the damage and the type of material the floor is. If the water damage was noticed early, the water damaged floors can be mopped up and dry out.

Water damaged hardwood floors when exposed to a high volume of water, needs to be refinished and re-stained. When cracked or split, the floors have to be removed and replaced.

When a large amount of water seeped into the laminated tile, it can warp and pop out of shape while vinyl tile can weaken its bond to its subfloor. In these cases, water damaged floors need to be replaced.

Will My Insurance Cover Water Damaged Floors from a Refrigerator Leak?

Homeowners insurance ONLY covers water damage that is accidental and sudden. For instance, water damage caused by a burst pipe, your insurance company will likely cover the affected damage. However, slow leaks such as water damage from a refrigerator, a freezer, or an ice maker are NOT covered by your insurance policy. Because water damage floors from a refrigerator leak happen due to negligence or lack of maintenance.

Your best bet for this type of water damage is using preventive measures. Regularly check your fridge and make sure that timely maintenance is done.

Need help?

Superior Restoration can help you in dealing with water damaged floors from a refrigerator leak. Our staff are  professionals and experts in water damage restoration and they are equipped with advanced technology. Need help? Don’t hesitate to call us.